Targeted Maintenance Based on Material
Leather Bar Stools
Dust daily with a dry cloth; for stains, gently wipe with a slightly damp, soft cloth and dry immediately to prevent water seepage.
Do not use alcohol, disinfectants, or strong alkaline cleaners; apply leather care lotion every 2–3 months.
Keep away from direct sunlight and heat sources to prevent fading and aging; avoid scratching with sharp objects.
Mesh/Fabric Bar Stools
Apply a fabric protector after purchase; vacuum at least once a week to remove dust from crevices.
For localized stains, gently dab and wipe with a mixture of water and neutral detergent; avoid vigorous rubbing to prevent snagging or stretching.
Do not wash or soak in water; air-dry in a ventilated, shaded area after cleaning. Trim loose threads with scissors rather than pulling them off by hand.
Solid Wood Bar Stools
Place in an environment with stable temperature and humidity; avoid direct contact between the surface and beverages or overheated objects.
For heavy soiling, wipe with warm water and diluted neutral detergent, then clean with fresh water; dry thoroughly and apply maintenance wax to restore luster.
Clean with a dry cloth; avoid exposing the wood to direct sunlight after wiping with a damp cloth to prevent rot or warping.
Bar Stools with Metal/Electroplated Bases
Wipe with a damp cloth and dry immediately; in humid environments, apply a thin layer of anti-rust oil periodically to prevent corrosion.
Do not place in damp areas; avoid contact with corrosive substances like hydrochloric acid or table salt, and keep away from areas exposed to soot or smoke.
If rust appears, apply machine oil to the affected area using cotton waste, let it sit briefly, then wipe clean to remove the rust.
